Table of Contents
Kuwait Jobs Today: Cubic Corporation announces new job opportunities. Are you looking for job opportunities in Kuwait? Cubic Corporation announces the opening of recruitment for many jobs in various specializations in Kuwaiton today’s date. These opportunities are available to all nationalities. Learn about the available jobs and how to apply through the following advertisement.
- A management position with a broad scope of work and responsibility. Based in Kuwait, the successful candidate will supervise and help grow the CLS team to implement the new Kuwait Air Force F18 P5CTS Ops and Maintenance Program.
- The successful candidate will work at the Ahmad al-Jaber Air Base and report to the Program Manager based Qatar.
- Supervise the F18 P5CTS O&M Program CLS staff.
- Supervise, train and run the ACMI maintenance facility and personnel on a day to day basis and plan resources in line with company and customer operational needs.
- Perform routine preventive and corrective maintenance on assigned electronic equipment.
- Consult with company engineering personnel to determine solutions to unusual problems in system operations and maintenance.
- Assist the CLS staff on all customer training exercises.
- Perform technical and semi-technical tasks not always electronic in nature.
- Operate and maintain the Display and Debrief Subsystems (DDS) when needed.
- Perform diagnostic routines that are programmed to include the DDS graphics computer, its peripherals and interfaces.
- Enter mission data and load media (DRD, DTD, tapes etc) for mission recording.
- Provide assistance as needed to Customer conduct of live missions and debriefs.
- Provide assistance to field engineers in setting up, installing and initiating the operations and servicing at field sites.
- Comply with Cubic’s values and adherence to all company policy and procedures. In particular comply with the code of conduct, quality, security and occupational health, safety and environmental policies and procedures.
- In addition to the duties and responsibilities listed, the job holder is required to perform other duties assigned by their manager from time-to-time, as may be reasonably required of them.
- Maintain a log containing the serial number, pod type, date, time, and remarks for all P5CTS pods checked in and out of the P5CTS pod shop.
- Maintain a daily status/availability log on all P5CTS pods.
- Maintain a record of elapsed Time Meter readings on a monthly basis and determine each pod’s operational time for the month.
- Operate and maintain the P5CTS Test Set in accordance with the applicable technical documentation.
- Perform Organizational-Level (O-Level) and Intermediate-Level (I-Level) maintenance tests and replacement of the Shop Replaceable Assemblies (SRAs) on the P5CTS pods.
- Assist as required in the operation and maintenance of the display equipment
- Perform duties of computer operations technician as required, which include the following:
- Load programs for operation and test.
- Perform subsystem test to assess operational readiness.
- Load all pre-mission exercise data into the Data Recorder Device (DRD).
- Maintain a control log of DRD issue to and receipt from aircrews.
- Operate the graphics terminals during live exercises and assist with display and control operations.
- Provide technical assistance to aircrews in setting up for replay/debriefing.
- Maintain and store records of mission tapes.
- Maintain a mission event log with specific, concise, and pertinent data entered under the following headings: date, time, mission/event, remarks, and operator.
- Interface directly with the aircrew regarding mission sortie effectiveness.
- Perform additional operations duties as directed by the Site Supervisor
- Comply with Cubic’s values and adherence to all company policy and procedures. In particular comply with the code of conduct, quality, security and occupational health, safety and environmental policies and procedures.
- In addition to the duties and responsibilities listed, the job holder is required to perform other duties assigned by their manager from time-to-time, as may be reasonably required of them.
Minimum Job Requirements:
- Technical background in a similar role with experience of working in a military environment.
- Basic IT skills using MS Office and testing software.
- Ability to read electrical wiring diagrams and schematics.
- Ability to use electronic tools and testing equipment.
- Position requires the ability to lift 75lbs. Will entail bending, reaching and fitting into tight places to perform normal duties.
Desirable:
- Prior military experience and leadership training would be beneficial.
- Prior experience working in a remote and/or foreign environment.
- A technical role with responsibility for the operation of the P5CTS Display and Debrief System based in Kuwait.
- The successful candidate will help to standup and deliver the Kuwait F18 P5CTS Ops and Maintenance Program.\
- The successful candidate will work at the Ahmad al-Jaber Air Base and report to the Site Manager who will be co-located.
- Assist as required in the operation and maintenance of the display equipment.
- Perform duties of computer operations technician as required, which include the following:
- Load programs for operation and test.
- Perform subsystem test to assess operational readiness.
- Load all pre-mission exercise data into the Data Recorder Device (DRD).
- Maintain a control log of DRD issue to and receipt from aircrews.
- Operate the graphics terminals during live exercises and assist with display and control operations.
- Provide technical assistance to aircrews in setting up for replay/debriefing.
- Maintain and store records of mission tapes.
- Maintain a mission event log with specific, concise, and pertinent data entered under the following headings: date, time, mission/event, remarks, and operator.
- Interface directly with the aircrew regarding mission sortie effectiveness.
- Perform additional operations duties as directed by the Site Supervisor.
- Assist as required with P5CTS operations and maintenance.
- Understand, acknowledge, and comply with the daily responsibilities for Security Classifications associated with this job, and must prove continued compliance with, responsibility for, and daily accountabilities for Classified Materials and Parts, as a primary and vital function of this position.
- Comply with Cubic’s values and adherence to all company policy and procedures. In particular, comply with the code of conduct, quality, security and occupational health, safety and environmental policies and procedures.
- In addition to the duties and responsibilities listed, the job holder is required to perform other duties assigned by their manager from time-to-time, as may be reasonably required of them.
الحد الأدنى من متطلبات الوظيفة:
- To go to the application page. ( Job opportunities for Cubic Corporation)
- Click on a job title to view details.
- Please click the Easy Apply button at the top of the page.
- Enter the required information in the pop-up screens.
- Click Review to review the form.
- Job source: The official website of the company
- Posted Date: 11-6-2024 (Please check the date before applying).
- Required Nationalities: All nationalities.
#Cubic #Corporation #Information #Technology #Services #Consultations #announces #appoint #candidates #Kuwait #positions #شركة #كوبيك #للخدمات #والاستشارات #في #مجال #تكنولوجيا #المعلومات #تعلن #عن #حاجتها #الي #تعيين #مرشحين #في #الكويت #للوظائف #التالية